Thursday, March 12, 2020, 1:00 PM (ET)

Plastics Plus

Online Auction
By Order of Secured Creditors, "Late Model" and "Like New" Equipment, Including: HP Indigo 20000 Digital Press, Karville Duplex Slitter, Karville Pouch Making Machine.  All Equipment New 2018/2019. Parsippany, New Jersey - USA
HP Indigo 20000 Digital Printing Press w/DFE - NEW 2018 S/N IL5100245, 7-Color, Plastic Package, 2.7 Million Impressions, High Resolution Image Quality:  Resolution: 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HDI, Printing Speeds: up to 101 feet / min in 4-color mode, in maximum repeat length, up to 135 feet / min in EPM mode, up to 82 feet / min in 5-color mode, In-Line Spectrophotometer, Substrate Thickness Range: 10-250 microns, PIP Auto Replacment System, Image Size 29" x 43" Maximum, Repeat Length: 21.6" Min 43" Max, Priming Unwind with Max Roll Dia. 39.4", Rewinder with Max Roll Dia 31.5"

Karville Pouch Making Machine #KS-DSUP-400 - NEW 2019
S/N AX100-008 (New 2019), Designed For: 2-sided seal pouches with/without zippers, 3-sided seal pouches with/without zippers and Stand-Up Pouches with/without zippers, Mechanical Speed: 200 cpm, Estimated Production Speed: > 130 cpm - 15m/min, Quick Change Over, PLC/HMI Control, Film Control, Unwind Section, Feed and Film Tension System, Tack Hole Punching, Bottom Gusseting Device, (7) Machine Frames, Servo Motors, Longitudinal Station, (3) Cross/Side Sealing Stations, Cross/Side Cooling Station, Eye Mark Reading Station, Punch Station, Flying Knife Cut Station, Exit Conveyor, Beckhoff Touch Panel 10" PLC Control

Karville Duplex Slitter #SLIT-HSI1300-Classic - NEW 2018 S/N 18-6042 (New 2018), Max Width 1300 mm, Machine Speed 500 m/min, Material to be Processed: PE PP and Laminates 12-200 microns / Rigid Film Like PET 10-150 micron, Shaftless Unwind with Hydraulic Lift-In System, Transport Section, Razor Slitting Section, Rewind Unit, Auto Length Counter, Auto Tension Control

7 Eastmans Road Parsippany, NJ 07054
Online Auction - Internet Bidding Only Bidding Status: Bidding Not Yet Open - Check Back Soon For Lot Catalog
First Lot Closes: Thursday, March 12, 2020, 1:00 PM (ET). Lots have 45-second staggered closing times with 1-lot closing every 45-seconds.
Open House Inspection: Wednesday, March 11,  9 AM to 4 PM (local time)
Buyers are fully responsible for all rigging and shipping costs. We strongly recommend all buyers to get rigging quotes prior to bidding and bid accordingly. For Rigging Quotes Contact: TBA
Registration Deposit / Bidder Approval.  All bidders that aren't pre-approved by Thomas Industries will be required to provide a refundable deposit, prior to being approved for bidding. The deposit must be  25% of the amount the bidder is looking to be approved for bidding up to.  Thomas Industries, at their sole discretion, reserves the right to deny bidding privileges to any customer. For information on bidder Approval or to provide a registration deposit contact Irina Lekhmus (email: or Phone: 203-458-0709). 

Currency:  (USD). This auction will be conducted in United States currency (USD)

Buyer's Premium: 15%

Staggered Closing Times: Lots Have 45-Second Staggered Closing Times.

Auto Extend Bidding: If a bid is submitted with less than 3-minutes remaining, the closing time for that lot will be extended by 3-minutes.

Payment Due In Full: Friday, March 13, 2020

Payment Types: Certified Check or Wire Transfer

As-Is Where-Is:  All Items Are Sold "As-Is Where-Is" With No Warranty or Guarantee of Operating Condition.  Auctioneer Strongly Recommends That Buyers Inspect Equipment Prior to Bidding.

Removal:  Removal By Appointment Only . All items must be removed by Tuesday, March 31, 2020. NO EXCEPTIONS.  Any items not removed by this date will be considered abandoned and bidder will forfeit all right to any items not removed, including all deposit or  payment monies. Removal Costs: Buyers are fully responsible for all cost to remove their purchases. Please get removal quotes prior to bidding and bid accordingly.

Legally Binding Contract: All bids constitute a legally binding contract and bidders will be legally obligated to make payment and remove items in accordance with the terms and conditions of the sale.
View Complete Terms & Conditions