• Barry-Wehmiller Marquip Ward United1500 mm (59”) Wizard Precision Sheeter #2 (New 2006) with (2) 72” Max Dia Roll Infeed (Dual Mode Dancer/Decurlers (4-Roll Stands), S/N 74560-7440/7340,  Marquip Wizard That Has Been Upgraded To The 100L Dual Motor Option It Can Run Substrates From 50# Paper To .036” Board, Multiple Webs Of Stock From 50# To .014” Can Be Run Through The Dual Slitting Section. The Five Head Slitting Section Allows For Four Piles To Be Slit From A Single Roll, Maximum Speed Is 1000 FPM Which This Machine Was Able To Consistently Produce Highly Accurate Clean Edged Sheets, Inline With The Sheeter Are Two Marquip Dual Unwinds Allowing Four Rolls To Be Sheeted At Once. Each Of The Unwinds Feed Into A Marquip 3 Bar Progressive Decurler With A Rotary Dancer That Allows For Flat Sheets On Even Difficult To Decurl Heavyweight Stocks, Width 8.5”-59.875”, Length 11”-82” (Operators Have Run 98” Lengths On This Machine) - Available for Prior Sale - Contact Auctioneer's Office
• Barry-Wehmiller Marquip Ward United1500 mm (59”) Precision Sheeter #3 (New 2005) with (4) 72” Max Dia. Roll Stands, S/N 74587,  Marquip Sheet Leader Retro Fit Performed By AJ Engineering That Can Sheet Substrates From 50# Paper To .028” Board, Multiple Webs Of Stock From 50# To .014” Can Be Run Through The Dual Slitting Section. The Four Head Slitting Section Allows For Three Piles To Be Slit From A Single Roll, Inline With The Sheeter Are Four Moore And White Shaftless Unwinds With Multiple Decurl Bars And Load Cell Tension Controllers, Width 18”-59.875”, Length 24”-78” - Available for Prior Sale - Contact Auctioneer's Office
• Marquip 1500 mm (59”) Precision Sheeter #1 (New 1999 – Modified 2006) with (2) 72” Max Dia. Roll Infeed Stands, Tidland 4-Head Slitter, Marquip L-Knife Model III S/N 71011-1000, Allen Bradley Panel View Plus 600 Control, Marquip Double Fly Knife Retrofit Performed By AJ Engineering, This Machine Can Handle 72” OD Rolls For Input And Can Produce 2 Out Sheets Up To A Width Of 30” And Single Out Sheets To 60” At Any Length Between 19” And 125”. This Sheeter Is Unique In Being Able To Produce Grand Format Sheets On Substrates From .008” To .030” In Thickness That Are Accurately Cut And Neatly Stacked, Width 20”-60”, Length 19”-125” - Available for Prior Sale - Contact Auctioneer's Office
• Lawson Pacemaker II 110" Paper Cutter, S/N BK 182 w/ (4) Spare Cutting Knives and Southworth Paper Shuttle System
• Cary Slitter Rewinder w/ Moore & White Roll Stand
• Sonoco Products Core Cutter w/ Hammond Dust Kolector Model CYB-8D, S/N 6760
• Interlake Silverstitcher Model HF25P, S/n B33070
• James Rohdin Cornering Machine Model HSM1, S/N 2473
• Eagle Automatic Rotary Stretch Wrapper Model 200EB, S/N WR1902035 w/ Ramp
• GLD Glen L. Dehart 20 HP Horizontal Hydraulic Baler
• Fox Baler Vertical Hydraulic Baler
• 2006 PAC Precision Air Convey Trim Removal System S/N 74537-5820 w/ (3) Trim Blowers, Diverters, Bag House and All Overhead Duct Work
• JV Manufacturing 207 Cram-A-Lot Trash Compactor Model COR-02, S/N CP08877-01, Max Ram Force 56,600 Lbs
• Sullair 25 HP 2-Stage Horizontal Tank Mounted Air Compressor, 39,252 Hours
• Kellogg American 10 HP 2-Stage Horizontal Tank Mounted Air Compressor Model B452B, S/N V9G2009PIZC w/ Pneumatech Compressed Air Dryer
• Boge C30F Compressed Air Dryer S/N 5075610 w/ Base Digital Control
• Boge Air Dryer Model BS125, S/N 399154270006
• Pneumatech Compressed Air Dryer Model AD-100, S/N 9205-TM111122-ST
• Terex Aerails Model TS-20 Scissor Lift, S/N 99320027, 800 Lb Cap, Max Height 20'
• Yale 11,500 Lb Cap LPG Forklift w/ Roll Clamp Model GLC120MJNGAEO84, S/N D818V02139C, Triple Mast, Solid Tire w/ Cascade Roll Clamp Model 77F-RC-01G, 7,700 Lb Capacity, 30" Load Center, 60" Roll Clamp, 8,267 Hours
• Komatsu 9,200 Lb Cap LPG Forklift w/ Roll Clamp Model FG45ST-7, S/N 101520A, Triple Mast, Solid Tire w/ Cascade 60" Roll Clamp, 12,665 Hours
• Caterpillar 5,000 Lb Cap LPG Forklift Model GC25K, S/N AT82D02328, Triple Mast, Side Shift, Solid Tires, 11,428 Hours
• Crown Electric Walk-Behind Pallet Truck Model 40GPW-4-14, S/N 7A121779, 4,000 Lb Cap w/ Battery Charger

951 Lunt Avenue
Elk Grove Village, IL 60007

First Lot Closes: Thursday, August 29, 11:00 AM (ET)
Lots have 1-minute staggered closing times with 1-lot closing every minute

Buyers are fully responsible for all rigging and shipping costs. We strongly recommend buyers obtain rigging quotes prior to bidding and confirm the rigging company can remove the intended purchases prior to the final removal date. Riggers listed on our site are not exclusive, buyers may use any rigging company of their choice as long as they provide Thomas Industries with satisfactory liability insurance.

For Rigging Quotes Contact:

Chicago Industrial Rigging
Val Striev
Phone: 847-845-7255

Rey Rigging Industrial
Rey Chavez
Phone: 708-473-9434

Registration Deposit / Bidder Approval.  All bidders that aren't pre-approved by Thomas Industries will be required to provide a refundable deposit, prior to being approved for bidding.  The deposit must be  25% of the amount the bidder is looking to be approved for bidding up to.  Thomas Industries, at their sole discretion, reserves the right to deny bidding privileges to any customer. For information on bidder Approval or to provide a registration deposit contact Irina Lekhmus (email: irina@thomasauction.com or Phone: 203-458-0709).

Currency:  (USD).  This auction will be conducted in United States currency (USD)

Buyer's Premium: 18%

Staggered Closing Times: Lots Have 1-Minute Staggered Closing Times.

Auto Extend Bidding: If a bid is submitted with less than 5-minutes remaining, the closing time for that lot will be extended to 5-minutes.

Payment Due In Full:  Friday, August 30, 2024

Payment Types:  Certified Check, Wire Transfer, E-Check (ACH) or Crypto (BTC/ETH)

As-Is Where-Is:  All Items Are Sold "As-Is Where-Is" With No Warranty or Guarantee of Operating Condition.  Auctioneer Strongly Recommends That Buyers Inspect Equipment Prior to Bidding.

Removal: Removal Begins Tuesday, September 3, 2024. Removal  Hours 9 am to 4 pm (M-F). All items must be removed by Friday, September 13, 2024.   Any items not removed by this date will be considered abandoned and bidder will forfeit all right to any items not removed, including all deposit or  payment monies

Removal Costs: Buyers are fully responsible for all cost to remove their purchases.  Please get removal quotes prior to bidding and bid accordingly.  

Legally Binding Contract:  All bids constitute a legally binding contract and bidders will be legally obligated to make payment and remove items in accordance with the terms and conditions of the sale.