AuctionDetails

Wednesday, September 26, 2018, 1:00 PM (ET)

Hall Manufacturing

Online Auction
By Order of Hall Manufacturing, Plant Closure, Including: Plastic Extrusion Lines, Granulators, Milling Machines, Lathes, Surface Grinders, Radial Arm Saws, Vehicles, Air Compressors, Forklifts, Miscellaneous Plant Support, etc.
Ringwood, New Jersey - USA
FEATURING:
  • 2.5” Davis Standard Extruder 25/1 L/D, 50 HP AC w/ VFD, Air Cooled, SS Hopper, Temp Panel (New 1998)

  • 2.5” Davis Standard Extruder Model Mark V, 40 HP AC w/ VFD, Air Cooled Temp Panel (New 1995)

  • 2.5" Davis Standard Extruder 25/1 L/D, Model Mark V, 40 HP AC w/ VFD, S/N R3630 (New 1995)

  • 3" Davis Standard Extruder 25/1 L/D S/N L0386, 40 HP DC, Temp Panel, Air Cooled

  • 2” Royal Extruder 14/1 L/D, 10 HP AC, Air Cooled, Temp Panel

  • 2" Welex Extruder 24/1 L/D, 25 HP DC, S/N 746, Temp Panel

  • 3.5” Royal Extruder 20/1 L/D, 40 HP DC w/ SCR, Air Cooled, S/N 4538

  • 2.5” Polytruder Extruder 24/1 L/D, 40 HP AC w/ VFD, Flender Gearbox, Temp Panel

  • 1.25" Davis Standard Pedestal Style Extruder 24/1 L/D, 5 HP DC, Temp Panel, S/N K2534

  • 1.25" Davis Standard Pedestal Style Extruder 24/1 LD, S/N K8459, Temp Panel

  • 1" Delta Plast Pedestal Style Extruder, 24/1 L/D, 3 HP DC, Temp Panel

  • 6" x 40" Polytruder Belt Puller, Dual Servo Motors 2 HP Each, Solid Belt

  • (7) Farris Belt Pullers Models C500F, C50VT, C550VT & CL550, 4" x 23" Solid Belt

  • (2) RDN Puller Model 230-6,  6" x 30" Solid Belt Puller

  • (3) CDS Servo Traveling Cut Off Saw Models: CSS 6.5-13, CT4.5-8

  • RDN Fly Knife Cutter Model EMC3DC (7/94 New)

  • RDN Cross Cut Saw Model C420, 14" OD Blade (7/87 New)

  • Conair Metaplast Saw Model MST4 S/N 896021

  • Conair Fly Knife Cutter Model PSC30D, S/N 85001

  • 6' CDS Vac Sizer Model CVS14-6, S/N 180803, SS Contact Parts

  • 8' CDS Vac Tank w/ Vac Pump Approx 12" W x 14" DP Stainless Steel Trough

  • RDN Vac Tank 14" x 14" x 12' Long SS, w/ Vac Pump

  • Foremost Desiccant Dryer Model DD2C, S/N 31000

  • (4) Cumberland & Conair Granulators: 8 x 12, 10 x 12, 14 x 16

  • Hot Pack Single Door Drying Oven Model 212570-10 w/ Stainless Steel Multi Shelf Interior, S/N 72588, Max Temp 100 Degrees

  • Stanford Surface Grinder Model MG w/ Eclipse Approx 8" Magnetic Chuck

  • Bridgeport 1 HP Vertical Milling Machine w/ Power Feed, Kurt Style, DRO

  • Rockwell Vertical Milling Machine w/ Variable Rate Power Feed, Bridgeport 6" Vise

  • Cincinnati 12 1/2 x 36 Lathe w/ 10" 4-Jaw Chuck, Approx 6" 3-Jaw Chuck, Fly Center, Tailstock

  • Southbend  Lathe Model A w/ Approx 6" 3-Jaw Chuck, Steady Rest, Tailstock

  • (6+) Craftsman Multi Drawer Roll Around Tool Cabinets, Loaded with Contents

  • (8+) Craftsman 10" Radial Arm Saw w/ Laser Trak & Base

  • Kaeser 25 HP Air Compressor Type AS31 #1.7840.20011 (Date of Mfg 2002), Approx Total Load Hours 074434 w/ Sigma Digital Controls, S/N 1236

  • TL Industries Baler/Compactor Model TVB 60S, 30" x 60"

  • Nissan 3,500 Lb Cap LPG Forklift Optimum 35, Model CPJ0118PV, w/ Triple Mast, Side Shift, 6 Degree Tiltback, 4993 Hours, S/N D696586

  • Complete Maintenance Department - Air Compressors - Forklifts - Plant Support & Much More!!!

EQUIPMENT LOCATION
Hall Manufacturing
297 Margaret King Avenue
Ringwood, New Jersey 07456
USA

AUCTION TYPE
Online Auction - Internet Bidding Only
Auction Status: Bidding Open!! Click Here to View Lot Catalog and Submit Bids Now!!

AUCTION DATE
First Lot Closes: Wednesday, September 26, 1:00 PM (ET).

Lots have 1-minute staggered closing times with 1-lot closing every minute.

INSPECTION
Open House Inspection: Tuesday, September 25, 9 AM to 4 PM (local time)

SHIPPING - RIGGING
Buyers are fully responsible for all rigging and shipping costs. We strongly recommend all buyers to get rigging quotes prior to bidding and bid accordingly.

For Rigging Quotes Contact:

Pedowitz Machinery Movers
Joe Duffy
Phone: 98-444-1419
Email: joed@pedowitz.com

TERMS & CONDITIONS

Registration Deposit / Bidder Approval.  All bidders that aren't pre-approved by Thomas Industries will be required to provide a refundable deposit, prior to being approved for bidding.  The deposit must be  25% of the amount the bidder is looking to be approved for bidding up to.  Thomas Industries, at their sole discretion, reserves the right to deny bidding privileges to any customer. For information on bidder Approval or to provide a registration deposit contact Irina Lekhmus (email: irina@thomasauction.com or Phone: 203-458-0709). 

Currency:  (USD).  This auction will be conducted in United States currency (USD)

Buyer's Premium: 15%

Staggered Closing Times: Lots Have 60-Second Staggered Closing Times.

Auto Extend Bidding: If a bid is submitted with less than 3-minutes remaining, the closing time for that lot will be extended by 3-minutes.

Payment Due In Full: Thursday, September 27, 2018.

Payment Types: Certified Check or Wire Transfer

As-Is Where-Is:  All Items Are Sold "As-Is Where-Is" With No Warranty or Guarantee of Operating Condition.  Auctioneer Strongly Recommends That Buyers Inspect Equipment Prior to Bidding.

Removal:  Removal begins Monday, October 1. Removal Hours: 9 AM to 5 PM (M-F). All items must be removed by Friday, October 12, 2018,  Any items not removed by this date will be considered abandoned and bidder will forfeit all right to any items not removed, including all deposit or  payment monies.

Removal Costs: Buyers are fully responsible for all cost to remove their purchases.  Please get removal quotes prior to bidding and bid accordingly.

Legally Binding Contract:  All bids constitute a legally binding contract and bidders will be legally obligated to make payment and remove items in accordance with the terms and conditions of the sale.

View Complete Terms & Conditions