Auction Alerts

Auction Details

Wednesday, July 31, 2019, 1:00 PM (ET)

McCormick Armstong

Online Auction
Former Assets of McCormick Armstrong, Plant Closure, Including: Sheet Fed and Web Printing Presses, Xerox IGen5 Digital Press, CTP Systems, Complete Bindery, Mailing Equipment, Packaging Equipment, Air Compressors, Forklifts, Plant Support, etc.
Wichita, Kansas - USA




FEATURING:
  • Heidelberg 6-Color Sheet Fed Printing Press Model SM102-6P3, S/N 538951 (New 1996), 126 Million Impressions, Perfector 2/4, Dalgren Litho Roll Away Coater, SAPC, Alcolor Dampening, CPC 103, Pile Feed and Delivery Ink Agitators, IR Dryer in Delivery , Grafix Powder Spray, Royce Refrigerated Recirculators, Royce Coating Pump, Dahlgren Chiller; Water Cooled Inkers; Automatic Wash-Up for Inkers, Air Cabinet, CPC 1.03 Full Press Console w/ Light Pen  - Subject to Prior Sale

  • Harris Cottrell 5-Unit Web Printing Press Model M-110, 17 3/4" Cutoff, 16" Web Width, Singel Web S/N 1645-100/5915 w/ Butler 32 x 42-10 Splicer S/N 2173-RH w/ Gantry and 3,000 Lb Hoist, Harris Constant Tension Infeed w/ Martin Edge Guide, 5-Perfecting Printing Units w/ Brush Dampening, Baldwin Ink-Levelers, Royce Refrigerated Recirculators, TEC Compact "C" Series 2 12' Gas Dryer w/ Optical Pyrometer at Exit, Smoke Tunnel, Harris 2/Roll, 1/Pass Chill Section, Rycoline 2/Side, 1/Pass Silicone Applicator, Martin Edge Guide, Harris Combination Folder w/ Double Parallel Cylinder, Harris Sheeter, Manual Plate Jig, Graphix Micro-Systems Full Ink Console

  • Xerox iGen5 110 Digital Print Production System (Machine is a Remanufactred IGEN4110, Installed 2016), Clicks: 2,456,000, 110 Pages/Minute, w/ A426 Feeder Tray Kit, iG4 UPG 110 26" Sheet Size, Bypass Tray, Matte Dry Ink Option, Xerox ATA Transfer Overdrive Install Kit, iGen 4 EFI Controller, Colorpath Sync OLP

  • Creo Trendsetter 800 II CTP System Model TSM, S/N TM400 (New 2004), w/Dell Xeon Rip

  • Creo Lotem 800 Quantum II CTP System, Model L800 Quantum 2540 F-Speed, S/N 0218-106800-01, F-Speed, 16 Plates/Hour, Square Spot, Glunz and Jensen Processor, Nita Plate Transfer, Stacker

  • Heidelberg Pacesetter 705A Saddle Stitcher S/N 127, 9-Pocket, Cover Feeder, Mail Table for Inside and Outside Addressing, Stitcher, 3-Knife Trimmer

  • Sheridan Pacesetter SP705A Saddle Stitcher S/N SL087 (New 1996) 6-Pocket, Cover Feeder, Stitcher, 3-Knife Trimmer, 4th & 5th Knife

  • Kolbus Trimmer Type HD150 S/N 334

  • Polar Mohr 54" Paper Cutter Model 137 MON S/N 5641118

  • Polar Mohr 45" Paper Cutter Model 115-MON, S/N 5531960 (New 1985)

  • Polar Mohr Paper Cutter Model 76EM S/N 5361141

  • Polar Mohr Paper Jogger Model RB5, S/N 5681083

  • Duplo Booklet Maker w/ (2) 10-Station Collator Towers Model DC10, Duplo Model DBM-120 Dynamic Booklet Maker, Duplo Model DBM-120T Dynamic Booklet Maker Trimmer

  • Canon Image Prograph Impo Proofer Model IPF8300S w/ Computer System and Stand

  • Billhoffer UVS 76 30" UV Flood Coater, Model 9084, w/ Mabeg Air Belt Feeder, 12" Fiberglass Screen Conveyor, UV Curing  Station w/ Air Cool Down Blowers, Receding Stacker, Automatic Lift Feeder, Siemens COROS OP25 Digital Controls

  • TEC Lighting UV Coater Model XCE18-1-3D

  • MBO Folder Model B30-C, Continuous Feed

  • (4) MBO Folder Model B23, Continuous Feed

  • (2) Stahl Folder Model S1424 and S1426

  • Challenge 5-Spindle Paper Drill Model MS1

  • Challenge 3-Spindle Paper Drill Model EH-3C S/N 985781

  • Challenge 3-Spindle Paper Drill Model MS-10A S/N 62071

  • Challenge Single Spindle Paper Drill Style E8, S/N 3682

  • Conquest 6-Station Inserter w/ Envelope Loader, Buskro Computer Station, Buskro Inkjet Print System S/N 00001160EM.2

  • Mailcrafters 6-Station Inserter Model 9800 Edge 2 Series w/ Adjustable Insert Feed Rate, S/N 26202202583

  • Rima Stacker Model RS-3310S 9-1/4 w/ Digital Controls, S/N 334956-10

  • Rima 13" Stacker Unit Model RS12 w/ Allen Bradley Panelview 550 Digital Controls

  • (3) Dynaric Strappers Model D-2400

  • (2) Dynaric Type RLM-1 Box Strapping Machine

  • Signode Quipp Automatic Box Strapper Automatic Model LBXNEWS (2012)

  • Signode Strapper Model LB-2000

  • Mosca Strapping Machine Type RO-M-P4 S/N 63600

  • SIM 90-Degree Tabber Model 90DEGTAB S/N 07-6438

  • Clever Inline Tip On Machine Type K5216  Servo S/S P870 (New 2008), w/ Nordson Pro Blue 4 Model 10222373A Glue Applicator, Nordson S/N SA08B46789, Clever S/N 11-100003 Servo S/S P870

  • Shanklin L-Seal Packaging Machine Model F4A w/ Infeed & Outfeed Conveyor

  • Texwrap Automatic Wrapping Machine Model 2219 w/ MM1-110 Digital Controls, Side Seal and Cross Seal Digital Temperature Display, S/N 01102

  • Arpac Packaging Machine Model 10520 S/N 1408

  • Weldotron L-Bar Sealer Model 5202A w/ Heat Shrink Tunnel, S/N A771752

  • Streamfeeder Quick Wrap Model H-50 S/N H504A102 (New 2007)

  • Application Engineering AEC Chiller Model CGAFC604AGD1000E000000TQW00 w/ (4) Compressors, 450 PSIG, S/N C02G06855

  • Newport  2 HP Vertical Milling Machine, 36” table

  • Southbend Lathe Approx  12” x 40"

  • Crown 4,500 Lb LPG Forklift Model C-5 1050-50 Triple Mast, 6 Degree Tilt Back, Automatic Fork Width Adjustment, Side Shift

  • Hyster 5,000 Lb LPG Forklift Model H50FT w/ Triple Mast, 6 Degree Tilt Back, Side Shift

  • Crown 4,500 Lb LPG Clamp Lift, Side Shifting, Model 65F-SSS-B059, w/ Dual Mast, Cascade 45F-RCP-03A 1 Roll Clamp Lifter

  • Yale 5,000 Lb LPG Forklift Model GC050DENUAE083 Triple Mast, Shift Shifter

  • Barrett  4,000 Lb Cap Electric Pallet Jack Model EWP40

  • Crown 3500 lb Narrow Aisle Forklift Model 35RRTT, Triple Mast

  • Simon 20' Extension Electric Scissor Lift Model X-2032

  • Maren Horizontal Baler 20 HP Hydraulic Motor, S/N 3927

  • Lake Engineering Horizontal Baler, 1600 PSI, S/N W02543

  • (3) Gardner Denver Rotary Screw Air Compressor 50 HP, Model EBH0JB and EDEQJH, Electra-Saver II Series

  • Gardner Denver RDS Series Refrigerated Air Dryer Model RDS200A-1-S, S/N 1039-08-30-2000-10060

  • Atlas Copco Rotary Screw Air Compressor Model GA37, 50 HP, S/N AP1593499 (New 2007)

  • Atlas Copco Air Compressor Model SF4, Part #71-102-1901

  • (3) Kaeser 60 HP Rotary Screw Air Compressor Model CS121, CS75 and DS75

  • Kaeser Refrigerated Air Dryer KRD Series Model KRD250

  • Great Lakes Air Dryer Model GRF-200A-436 250 PSIG, S/N 25822JK

  • Plant Support Including: (20+) Hydraulic Pallet Jacks, Morgan 18' Storage Trailer, (6) Lincoln Ink PUmps, Forklift Boom Attachment, (4) Microair Smog Hog Units #MT1251, Die Lift Carts, Digital Bench Scales, Portable Staircases, (5+) Craftsman Roll Around Tool Cabinets, Shop Vacs, Banding Carts, Dock Plates, Hand Trucks, Pallet Racking, Shelving, Corrugated Boxes, Wire Bins, etc.

  • Office Furniture & Equipment: Large Offering, Including: Conference Tables, Executive Offices, File Cabinets, Swivel Chairs, Credenzas, Drafting Tables, etc.

MUCH MORE!! TOO MUCH TO LIST!!

EQUIPMENT LOCATIONS:
McCormick Armstrong
1501 E Douglas
Wichita, Kansas 67211
USA

LOCATION #2
169 S Jefferson St
Berne, IN
See Lots #140 through #200

AUCTION TYPE
Online Auction - Internet Bidding Only
Auction Status: Bidding Not Yet Open. Check Back Soon For Lot Catalog.

AUCTION DATE
First Lot Closes: Wednesday, July 31, 2019, 1:00 PM (ET).

Lots have 1-minute staggered closing times with 1-lot closing every minute.

INSPECTION
Open House Inspection: Tuesday, July 30, 9 AM to 4 PM (local time)

SHIPPING - RIGGING
Buyers are fully responsible for all rigging and shipping costs. We strongly recommend all buyers to get rigging quotes prior to bidding and bid accordingly.

For Rigging Quotes Contact:

Kevin Smith
Webline Industrial Technologies, Inc.
Cell (317) 714-6462
weblineinc@aol.com

TERMS & CONDITIONS

Registration Deposit / Bidder Approval.  All bidders that aren't pre-approved by Thomas Industries will be required to provide a refundable deposit, prior to being approved for bidding.  The deposit must be  25% of the amount the bidder is looking to be approved for bidding up to.  Thomas Industries, at their sole discretion, reserves the right to deny bidding privileges to any customer. For information on bidder Approval or to provide a registration deposit contact Irina Lekhmus (email: irina@thomasauction.com or Phone: 203-458-0709). 

Currency:  (USD).  This auction will be conducted in United States currency (USD)

Buyer's Premium: 15%

Staggered Closing Times: Lots Have 60-Second Staggered Closing Times.

Auto Extend Bidding: If a bid is submitted with less than 3-minutes remaining, the closing time for that lot will be extended by 3-minutes.

Payment Due In Full: Thursday, August 1, 2019

Payment Types: Certified Check or Wire Transfer

As-Is Where-Is:  All Items Are Sold "As-Is Where-Is" With No Warranty or Guarantee of Operating Condition.  Auctioneer Strongly Recommends That Buyers Inspect Equipment Prior to Bidding.

Removal:  Removal begins Thursday, August 1, 2019. Removal Hours: 9 AM to 5 PM (M-F). All items must be removed by Friday, August 16, 2019.  Any items not removed by this date will be considered abandoned and bidder will forfeit all right to any items not removed, including all deposit or  payment monies.

Removal Costs: Buyers are fully responsible for all cost to remove their purchases.  Please get removal quotes prior to bidding and bid accordingly.

Legally Binding Contract:  All bids constitute a legally binding contract and bidders will be legally obligated to make payment and remove items in accordance with the terms and conditions of the sale.



View Complete Terms & Conditions